A20-T25-S2-C 3 way T L type brass 1 inch horizontal motorized valve

Tonheflow motorized valve manufacturer

Tonhe mainly produces motorized shut off ball valve from 1/4" to 2",
Some valves approved NSF61-G, CE, ROHS and other international certification.

Home> Products > 3 way brass motorized valve

A20-T25-S2-C 3 way T L type brass 1 inch horizontal motorized valve

Min.Order Quantity: 1 Piece/Pieces
Supply Ability: 5000 Piece/Pieces per Month
Port: ningbo,Shanghai
Payment : T/T, Paypal

Service On Line

Tonhe is a china manufacturer, we focus on 3 way brass motorized valve(1/4" - 1"), which are CE, RoHS, IP67 approved, and SS valve NSF61 approved. Our company also SGS ISO9001 approved.

Technical Parameters:

Valve size	BSP/NPT 1" DN25 Gray actuator
Maximum working pressure	1.0 MPa
Circulation medium	Fluid, air
Rated voltage	DC12v, DC24v,DC9-24v, AC110-230v
Wiring control methods	CR2 01, CR5 01with feedback wire
Working current	≤1A
Open/close time	≤15S
Life time	50000 times
Valve Body material	Brass
Actuator material	Engineering Plastics
Sealing material	EPDM & PTFE
Actuator rotation	90°
Max. torque force	10Nm
Cable Length	0.5m,1.5m（Optional）
Environment temperature	-15℃～50℃
Liquid temperature	2℃～90℃
Manual override	No
Indicator	Yes
Protection class	IP67

Flow direction

Before order, please choose which flow direction you need, see below picture:

3 way brass motorized vlave picture show

Wiring diagram

CR2 01 Wiring Diagram ( 2 wires control )

·RD connect with positive, the BK connect with negative, the valve closed, the actuator automatically power off after in place , the valve remains fully closed position .
·BK connect with positive, the RD connect with negative, the valve open, the actuator automatically power off after in place, the valve remains fully open position .
﹡Suitable Working Voltage: DC12V/DC24V
﹡Exceeding the working voltage is forbidden

CR5 01 Wiring diagram ( with feedback signal)

1. RD connect with positive, the BK connect with negative，the valve closed, the actuator automatically power off after in place .
2 BK connect with positive, the RD connect with negative，the valve open, the actuator automatically power off after in place .
3 GR & WT are connect when the valve open fully, YW & WT are connect when the valve closed fully
Suitable Working Voltage:：DC5V/DC12V/DC24V
Exceeding the working voltage is forbidden

Valve Actuator gear

our A20 actuator gear is brass(biggest gear) + stainless steel

Our electronic components are basically imported, all choose the better quality of the accessories, such as switches, we use better quality Taiwan switch.

When you inquiry the valve, pls confirm the detail technical data :

1)valve size
2)material, brass or stainless steel?
3)working voltage
4)wiring diagram
5)thread BSP or NPT?
6)quantity?
7)cable length, 0.5m is OK for you?
8)flow direction?