PVC motorized valve data sheet PDF format

Technical Parameters:

Valve size	NPT/BSP/no thread socket type 3/4" DN20
Maximum working pressure	1.5 MPa
Circulation medium	Fluid, air
Rated voltage	DC12v, DC24v,AC/DC9-24, AC110-230v
Wiring control methods	CR2-02 CR5-02
Working current	≤1A
Open/close time	≤15S
Life time	50000 times
Valve Body material	PVC,UPVC,CPVC,PPH（Optional）
Actuator material	Engineering Plastics
Sealing material	EPDM & PTFE
Actuator rotation	90°
Max. torque force	10Nm（Optional）
Cable Length	0.5m,1.5m（Optional）
Environment temperature	-15℃～50℃
Liquid temperature	2℃～90℃
Manual override	No
Indicator	Yes
Protection class	IP67

No thread Socked type standard confirm

when you choose the PVC valve body No thread, please confirm you need which standard. see below picture choose you need.
1)ANSI 2)JIS 3)DIN 4)CNS

CR2 02 Wiring Diagram ( 2 wires control – Spring return in case of the power is failure)

·When SW is closed , the valve open. the actuator automatically power off after in place
·When SW is open, the valve closed, the actuator automatically power off after in place
﹡Suitable Working Voltage: AC/DC9-24V，AC/DC110V-230V,AC/DC9-35V(with manual override).
﹡Exceeding the working voltage is forbidden

CR5 02 Wiring diagram ( with feedback signal)

·When SW is closed , the valve open. the actuator automatically power off after in place
·When SW is open, the valve closed, the actuator automatically power off after in place
﹡BL & WT are connect when the valve open fully, YW & WT are connect when the valve closed fully
﹡Suitable Working Voltage: AC/DC9-24V, AC/DC9-35V, AC/DC110V-230V
﹡Exceeding the working voltage is forbidden

When you inquiry the valve, pls confirm the detail technical data :

1)valve size
2)material, brass or stainless steel or PVC?
3)working voltage
4)wiring diagram
5)thread BSP or NPT or no thread?
6)quantity?
7)cable length, 0.5m is OK for you?