PVC motorized valve data sheet PDF format

Technical Parameters:

Valve size	NPT/BSP/no thread socket type 2"
Maximum working pressure	1.5 MPa
Circulation medium	Fluid, air
Rated voltage	DC12v, DC24v,AC/DC9-24, AC110-230v
Wiring control methods	CR2-01 CR2-02 CR3-03 CR3-05 CR4-01 CR5-01 CR5-02 CR7-04（Optional）
Working current	≤1A
Open/close time	≤15S
Life time	50000 times
Valve Body material	PVC,UPVC,CPVC,PPH（Optional）
Actuator material	Engineering Plastics
Sealing material	EPDM & PTFE
Actuator rotation	90°
Max. torque force	10Nm（Optional）
Cable Length	0.5m,1.5m（Optional）
Environment temperature	-15℃～50℃
Liquid temperature	2℃～90℃
Manual override	No
Indicator	Yes
Protection class	IP67

No thread Socked type standard confirm

when you choose the PVC valve body No thread, please confirm you need which standard. see below picture choose you need.
1)ANSI 2)JIS 3)DIN 4)CNS

CR2 01 Wiring Diagram ( 2 wires control )

·RD connect with positive, the BK connect with negative, the valve closed, the actuator automatically power off after in place , the valve remains fully closed position .
·BK connect with positive, the RD connect with negative, the valve open, the actuator automatically power off after in place, the valve remains fully open position .
﹡Suitable Working Voltage: DC5V/DC12V/DC24V
﹡Exceeding the working voltage is forbidden

CR2 02 Wiring Diagram ( 2 wires control – Spring return in case of the power is failure)

·When SW is closed , the valve open. the actuator automatically power off after in place
·When SW is open, the valve closed, the actuator automatically power off after in place
﹡Suitable Working Voltage: AC/DC9-24V，AC/DC110V-230V,AC/DC9-35V(with manual override).
﹡Exceeding the working voltage is forbidden

CR3 01 Wiring Diagram (3 wires control )

·RD & GR connect with positive, BK connect with negative
·When OPEN( RD) & SW connected , the valve open, the actuator automatically power off after in place , valve remains fully open position
·When CLOSE(GR) & SW connected, the valve closed, the actuator automatically power off after in place, valve remains fully closed position.
﹡Suitable Working Voltage: DC5V/DC12V/DC24V/AC/DC9-35V
﹡Exceeding the working voltage is forbidden

CR3 02 Wiring Diagram (3 wires control )

·RD connect with positive, the BK & GR connect with negative
·SW CLOSED, the valve OPEN, the actuator automatically power off after in place.
·SW OPEN, the valve CLOSED, the actuator automatically power off after in place.
﹡Suitable Working Voltage: DC9-35V
﹡Exceeding the working voltage is forbidden

CR3 03 Wiring Diagram (3 wires control)

·RD& GR connect with positive, the BK connect with negative
·SW CLOSED, the valve OPEN, the actuator automatically power off after in place
·SW OPEN, the valve CLOSED, the actuator automatically power off after in place.
﹡Suitable Working Voltage: AC/DC9-35V/AC110-230V
﹡Exceeding the working voltage is forbidden

CR3 04 Wiring Diagram ( 3 wires control )

·RD & GR connected with positive, and the BK connected with negative
·When RD & SW connected, the valve closed, the actuator automatically power off after in place , remains fully closed position
·When GR & SW connected, the valve open, the actuator automatically power off after in place , remains fully open position.
﹡Suitable Working Voltage: DC5V/DC12V/AC/DC9-35V
﹡Exceeding the working voltage is forbidden

CR3 06 Wiring Diagram ( 3 wires control – Spring return in case of the power is failure)

·RD& GR connect with positive, the BK connect with negative
·SW CLOSED, the valve OPEN, the actuator automatically power off after in place
·SW OPEN, the valve CLOSED, the actuator automatically power off after in place.
When external power off, the valve closed, the actuator automatically power off after in place
﹡Suitable Working Voltage: AC110-230V
﹡Exceeding the working voltage is forbidden

CR4 01 Wiring Diagram (4 wires control )

1、RD & BK are connected to the power, WT & YW are connected to the controlled wiring.
2、When the SW is closed , the valve open
3、When the SW is open , the valve closed Suitable Working Voltage:：AC/DC110V-230V
Exceeding the working voltage is forbidden
The control wiring with power DC5V , when muitiple motorized valves are working in paralled , must put the same
color control wiring together, otherwise the valve could working normally .

CR5 01 Wiring diagram ( with feedback signal)

1. RD connect with positive, the BK connect with negative，the valve closed, the actuator automatically power off after in place .
2 BK connect with positive, the RD connect with negative，the valve open, the actuator automatically power off after in place .
3 GR & WT are connect when the valve open fully, YW & WT are connect when the valve closed fully
Suitable Working Voltage:：DC5V/DC12V/DC24V
Exceeding the working voltage is forbidden

CR5 02 Wiring diagram ( with feedback signal)

·When SW is closed , the valve open. the actuator automatically power off after in place
·When SW is open, the valve closed, the actuator automatically power off after in place
﹡BL & WT are connect when the valve open fully, YW & WT are connect when the valve closed fully
﹡Suitable Working Voltage: AC/DC9-24V, AC/DC9-35V, AC/DC110V-230V
﹡Exceeding the working voltage is forbidden

CR7 01 Wiring Diagram ( 7 wires control with feedback signal )

---RD connect with positive
---GR connect with SW and negative wiring
--- BK connect with negative wiring
---SW open. the valve open, and keeping fully open.
---SW closed. the valve closed, and keeping fully closed.
----BL & GY connect with the valve's fully open signal wiring
--- YW & WT connect with the valve's fully closed signal wiring.
 ﹡Suitable Working Voltage: DC5V，DC12V，DC24V，AC/DC9-35V(wide input range voltage,)
﹡Exceeding the working voltage is forbidden
※ Feedback with load ability：
① The Max. off voltage: DC36V AC220V
② The Max. off current: ≦0.4A

CR7 02 Wiring Diagram ( 7 wires control with feedback signal )

1.RD & GR connect with positive, the BK connect with negative
2. When RD & SW connected, the valve open, the actuator automatically power off after the valve fully open.
3. When GR & SW connected, the valve closed, the actuator automatically power off after the valve fully closed.
4. BL & GY connect with the valve's fully open signal wiring
5. YW & WT connect with the valve's fully closed signal wiring
﹡Suitable Working Voltage: DC5V/DC12V/DC24V
﹡Exceeding the working voltage is forbidden
※ Feedback with load ability：
① The Max. off voltage: DC36V AC220V
② The Max. off current: ≦0.4A

CR7 04 Wiring Diagram ( 7 wires control with feedback signal )

·RD & BK are connected to the power, GR & GY are connected to the controlled wiring.
·When the SW is closed , the valve open
·When the SW is open , the valve closed
·BL & GY connect with the valve's fully open signal wiring
·YW & WT connect with the valve's fully closed signal wiring.
Suitable Working Voltage:：AC/DC110V-230V
Exceeding the working voltage is forbidden